Description
XFLY 1800MM TWIN OTTER WITHOUT TX/RX/BATT
Modeled after DeHavilland DHC-6 Twin Otter, the XFly Model Twin Otter 1800mm was developed by their team with the intention to make it true-to-scale, from design features such as cockpit with clear windows, control surfaces, fixed tricycle landing gears, twin power system setup, to STOL(Short Takeoff and Landing) capabilities.
Powered by a single 6S 5000-6000mAh LiPo battery, the combination of twin 3541-KV550 motors, twin 40A ESCs and 3-blade propellers brings RC pilots the optimum setup for power and duration. The XFly Twin Otter is capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight. Shock-absorbing metal front landing gear and rigid main landing gears are equipped for easy ground handling and more durability.
Two-piece wing, removable nose and stabs make it easy to assemble, dissemble and transport. Clear glass-like windows allow for FPV installation in the cockpit for better visual experience. Clearly visible in both day and dusk conditions, the vibrant yellow/blue colour scheme and the pre-installed LED lights not only add scale appeal but practical visual reference in the sky.
FEATURES
- Retaining scale features of the full scale Twin Otter
- STOL (Short Takeoff and Landing) capabilities
- Cockpit with clear windows, control surfaces, fixed tricycle landing gears
- Factory-installed twin efficient power system
- Capable of aerobatic maneuvers including loops, 4-point rolls and inverted flight
- Shock-absorbing metal front landing gear and rigid main landing gears
- Two-piece wing, removable nose and stabs
- Clear glass-like windows and capacious cockpit allow for FPV installation
- Pre-installed LED lights for added visibility
- Vibrant yellow/blue colour scheme
SPECIFICATIONS
Overall Length:Â 1457mm/57.4in
Flying Weight:Â 3700g
Motor Size:Â 3541-KV550*2
ESC:Â 40A*2
Servo:Â 13g servos*2
Channels:Â 5CH- aileron, elevator, throttle, rudder/steering, flap
CG:Â 61mm from the leading edge
Wing Load: 87.5g/dm²
Wing Area: 40dm²
Recommended Battery:Â 6S 5000-6000mAh
Approx Flying Duration:Â 5-10 mins
Assembly Time:Â 10 mins
Skill Level:Â Intermediate
Age Level:Â 14 years +
Flap:Â Yes
Retract:Â No
Landing Gear:Â Fixed main landing gear, steerable nose gear
Prop Size:Â 3-blade 10*7”
REQUIRED TO COMPLETE
- Radio
- Transmitter
- Battery and Charger

Corally Ssx8S Car Kit Chassis
MNRC MN111 RTR 1/18 2.4G 4WD RC Car LED Light Climbing Rock Crawler Off-Road Truck Portal Axle Alloy Shell Toys Classic Vehicles Models - Black
Performa Racing P1 Graphene HV Lipo Shorty 4000 ULCG 7.6V 120C
KFPLAN KF10 4X4 monster truck
Bundle: Kyosho Ultima'87 WC Worlds Spec 2WD 1:10 Kit KA 20th Anniversary Ltd
Kyosho EP Fantom 4WD Ext CRC-II 1:12 Kit *Legendary Series*
Xfly Twin Edf 70Mm J65
MN 99s 2.4G 1/12 4WD RTR Crawler RC Car Off-Road For Land Rover Vehicle Models
PINECONE FOREST SG 2410 Fiesta Rally car RTR 1/24 2.4G 4WD RC Car
Key Chain, 13x3 cm
Kyosho USA-1 VE 1:8 4WD Readyset EP (Torx8-Brainz8 ESC & 2x lipo batteries)
Flywing Huey RC helicopter Ready-to-fly 






































Reviews
There are no reviews yet.